Spartus Easy 205E Pulse DC. It is a modern digitally controlled inverter welder, constructed on the basis of IGBT and PWM technology. Allows welding TIG and MMA. It is powered with single-phase 230V source power.
Small, light and versatile. Ideal for welding steel and stainless steel. Built-in adjustable pulse welding, allows you to connect even very thin elements. Maximum welding current for both methods is 200A, so Spartus Easy 205E Pulse TIG DC will also work on light work production.
Easy to use and intuitive control panel function allows precise control of all important welding parameters for TIG and MMA.
Examples of application: portable repair, working workshop, lightweight constructions, maintenance.
| Input | ~1× 230V ± 10% 50 / 60 Hz |
| Welding Current TIG [A] | 5 – 200 |
| Duty cycle [%] | 35 |
| TIG PARAMETERS | |
| Start Amps, End Amps |  |
| Gas pre flow [s] | 0 – 2 |
| Up slope [s] | 0 – 10 |
| Down slope [s] | 0 – 10 |
| Gas post flow [s] | 0 – 10 |
| TIG PULSE mode | |
| Pulse Amps [A] | 5 – 200 |
| Base Amps [A] | 5– 200 |
| Pulse Width [%] | 5 – 95 |
| Pulse frequency [Hz] | 5 – 200 |
| 2T/4T Control | |
| Arc ignition | LIFT / HF |
| Output remote control | |
| MMA PARAMETERS | |
| MMA welding mode | |
| Welding current MMA [A] | 5 – 200 |
| Hot Start range [%] | 0 – 10 |
| Arc Force range [%] | 0 – 10 |
| No-load voltage [V] | 65,8 |
| OTHER | |
| Current consumpiton [A] | TIG 34 / MMA 43 |
| Power factor (cosφ) | 0,75 |
| Efficiency η [%] | 85 |
| Insulation class | H |
| Protection class | IP23 |
| Weight [kg] | 7,9 |
| Dimensions [mm] | 420 × 135 × 240 |
